Kegco 24″ Wide Single Tap All Stainless Steel with Keg Kegerator HBK1XS-1K Review
Dispense like the pros at home with the Kegco HBK1XS-1 Home Brew Kegerator! This keg beer cooler is sturdily built. so it can stand up to the demands of commercial environments like a restaurant or tasting room. but it is small enough to easily move it around your home. It is ETL and ETL Sanitation Listed and NSF Compliant. ensuring that it has met the requirements of widely accepted product safety standards for draft beer dispensers. This kegerator has everything you need to dispense your own home brew recipes. including the keg! The pre-configured kit features upgrades like the aluminum 5 lb. CO2tank with corrosion-resistant red finish. a Commercial Grade Double Guage Regulator and a polished stainless steel draft tower at no additional cost – a $25 value – and comes with a brand new. 304 grade stainless steel ball lock keg with a rubber carrying handle.
-
Blower Hose for Air-Cooled Tower
Keep the beer line cooled all the way up to the back of the faucet
-
Fan-Forced Cooling
An interior fan provides rapid cool down and ensures consistent temperatures
-
Internal Thermometer
Quickly and accurately monitor the internal temperature at a glance
-
Knockout for external CO2Tank or Drain Hose
This knockout allows you to mount your CO2Tank outside the cabinet or direct the drip tray runoff to an external drain
-
Drip Tray Drain Receptacle
Any spills from the faucet can be directed into this bottle for quick and easy cleaning
-
Steel Walls
Behind these walls lies foamed in place polyurethane insulation to maintain a specific steady temperature
-
Rubber Floor Mat
A rubber floor mat reduces the shock of heavy kegs on the stainless steel floor
4″ locking casters make this beer dispenser easy to move. while the built-in drip tray and steel interior make it easy to clean. A 1/7 hp compressor provides cooling and cool air is fan-forced into the tower to ensure your beer is cold all the way up to the faucet. It comes with an air-cooled 3″ diameter draft tower. so if your direct draw will be provided by your beer distributor. you’re all set. Beverage Factory offers the ability to add a custom draft system with our top quality selection of regulators. couplers and fittings. See the available options below and feel free to contact our expert staff with any questions you may have.
WARNING:This product can expose you to chemicals including styrene. which is known to the State of California to cause cancer. For more information. go towww.P65Warnings.ca.gov.
FEATURES
- Includes a brand new 5 lb. Aluminum CO2Tank with Electric Red Epoxy Finish
This tank is produced from high strength aluminum alloy 6061-T6. a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved. and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill. - Includes Commercial Grade Double Gauge CO2Regulator
This regulator works with any CO2tank with a CGA-320 valve. The top gauge measures PSI. indicating how much CO2pressure is inside of the keg. The side gauge measures the remaining volume of CO2in the tank. so you’ll know when it’s about time to get the tank filled. This regulator features a T-style adjustment valve that can be adjusted by hand. eliminating the need for a screwdriver. - Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Worm Drive Clamps
This 5 foot length of 5/16″ I.D. Blue Air/CO2Tubing is made of Thermoplastic Vinyl Hose (Super Vinyl). It will not rot. swell. or dry out. and is unaffected by normal cleaning compounds. This air line assembly comes with two durable stainless steel worm drive clamps that can be easily installed or removed with a flat head screwdriver. - Includes Ball Lock Home Brew Keg Tap Complete Set
This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4″ nut and 5/16″ hose barb already attached for easy connection to the air line. The beer out connector has a 3/16″ hose barb that connects to the 3/16″ beer line. - Includes a 3″ Diameter Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3″ diameter single faucet metal draft tower made of polished stainless steel. It comes complete with a chrome plated faucet with brass lever and 5 feet of 3/16 inch I.D. clear beer tubing. This tower is mounted using the gasket and four screws that are included. - Includes Brand New 5 Gallon Ball Lock Home Brew Keg
Made of durable and sanitary 304 grade stainless steel. this Cornelius Pepsi keg has a permanently molded rubber bottom skirt and handles for easy carrying. The ball lock fittings can be easily accessed for cleaning and maintenance. and the stainless steel lid fastens tightly to the body and includes a pressure release valve. - All dispensing accessories are UL recognized components
- Continuous Cold Air Channeled Through Tower to Ensure Cold Product
- Heavy-Duty Stainless Steel Top
- Built-In Drip Tray with Drain
- Stainless Steel Interior Walls and Ceiling
- Shock Reducing Rubber Floor Mat
- Magnetic Gasket Provides Positive Door Sealing
- Self-Closing Door with Lock
- Refrigeration System Utilizes Ozone Friendly R134a Refrigerant
- CFC-Free Foamed-in-Placed Polyurethane Insulation
- Knockout for Remote CO2or Nitrogen Tank
- Stainless Steel Finish
- ETL abd ETL Sanitation Listed for Commercial Use
- Maximum Ambient Temperature: 90 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater. so if the ambient temperature is lower than the set temperature. the internal temperature will match the external temperature.
SPECIFICATIONS
| Dimensions | |
| Height | 40″ |
| Width | 23.5″ |
| Depth | 31″ |
| Weight | |
| Unit Weight | 143 lbs |
| Shipping Weight | 187 lbs |
| Warranty | |
| Labor | 1 Year |
| Parts | 1 Year |
| Compressor (Parts Only) | 5 Years |
| Key Features | |
| Built-in Capable | No |
| Security Lock | Yes |
| Keg Coupler | Yes |
| Regulator | Yes |
| CO2 Tank | Yes |
| Cleaning Kit | No |
| Outdoor Use | No |
| Commercial Use | Yes |
| Keg Storage Capacities | |
| Full Size / 1/2-Barrel | Holds 1 |
| Pony Size / 1/4-Barrel | Holds 1 |
| 1/4-Barrel Slim | Holds 2 |
| 1/6-Barrel | Holds 3 |
| 5 gal. Ball/Pin Lock Keg | Holds 3 |
| Exterior | |
| Cabinet | Stainless Steel |
| Drip Tray | Yes |
| Guard Rail | Yes |
| Casters | Yes |
| Draft Beer Tower | |
| Number of Faucets | 1 |
| Material | Chrome |
| Diameter | 3″ |
| Door | |
| Color / Material | Stainless Steel |
| Number of Doors | 11 |
| Door Handle | Recessed |
| Field Reversible | No |
| Accepts Custom Overlay Panel | No |
| Cooling System | |
| Type | Compressor |
| Defrost System | Automatic |
| Front Ventilation | No |
| Controls | |
| Adjustable Thermostat | Yes |
| Digital | No |
| Electrical | |
| Electrical Requirements | 115V / 60HZ |
| Running Amps | 1.8A |
MANUALS
USER MNUAL
Reviews
There are no reviews yet.